DiraChart MDS item reference

K0200Section Kv1.20.1Manual page K-2

Height and Weight

Item Rationale

Quick coding

Answer Codes

Use the item-specific response choices below when structured codes apply.

Response format: Instruction / group heading

This row introduces a grouped MDS item. Complete the applicable child items shown in the current item set.

Item-specific instructions

Coding Guidance

Review what the item asks, how to choose the response, and what should be verified before submission.

RAI Manual v1.20.1

Steps for Assessment

for K0200A, Height
1. Base height on the most recent height since the most recent admission/entry or reentry.
Measure and record height in inches.
2. Measure height consistently over time in accordance with the facility policy and procedure,
which should reflect current standards of practice (shoes off, etc.).
3. For subsequent assessments, check the medical record. If the last height recorded was more
than one year ago, measure and record the resident’s height again.

Manual page K-2
RAI Manual v1.20.1

Coding Instructions

for K0200A, Height

Record height to the nearest whole inch.

Use mathematical rounding (i.e., if height measurement is X.5 inches or greater, round
height upward to the nearest whole inch. If height measurement number is X.1 to X.4
inches, round down to the nearest whole inch). For example, a height of 62.5 inches would
be rounded to 63 inches and a height of 62.4 inches would be rounded to 62 inches.
Steps for Assessment for K0200B, Weight
1. Base weight on the most recent measure in the last 30 days.
2. Measure weight consistently over time in accordance with facility policy and procedure,
which should reflect current standards of practice (shoes off, etc.).
3. For subsequent assessments, check the medical record and enter the weight taken within 30
days of the ARD of this assessment.
4. If the last recorded weight was taken more than 30 days prior to the ARD of this assessment
or previous weight is not available, weigh the resident again.
5. If the resident’s weight was taken more than once during the preceding month, record the
most recent weight.
Coding Instructions for K0200B, Weight

Use mathematical rounding (i.e., If weight is X.5 pounds [lbs] or more, round weight
upward to the nearest whole pound. If weight is X.1 to X.4 lbs, round down to the nearest
whole pound). For example, a weight of 152.5 lbs would be rounded to 153 lbs and a
weight of 152.4 lbs would be rounded to 152 lbs.
K0200: Height and Weight (cont.)

If a resident cannot be weighed, for example because of extreme pain, immobility, or risk
of pathological fractures, use the standard no-information code (-) and document rationale
on the resident’s medical record.

Manual page K-2
MDS item matrix

Assessment Applicability

See where this item applies across Nursing Home, Swing Bed, discharge, required-use, OBRA, and program or policy columns.

17 relationships6 groups
Official CMS source

Verify in the CMS Source

Open the mapped manual or item-set location without losing your place on this item page.

SourceCMS MDS 3.0 RAI Manual v1.20.1
Effective2025-10-01
Mapped locationManual page K-2
Reference details

Deeper help after the reference answer

Open these tools when you need additional drilldown, CAA crosswalk, documentation, source-locator, or AI-context detail.